The Filmtec BW30-365 High Rejection Brackish Water RO Membrane Element features the thickest feed spacer available in the industry to decrease the fouling effect of difficult feed water sources. The BW30-365 is best suited for systems treating challenging feed streams, where reliable pre-treatment is not an option or where maximum cleanability of the element is desired.

Specifications:

Up to 9500 gallon per day production
Up to 600 psi
Fits 8" membrane housings or pressure vessels
Features the thickest feed spacer to lessen impact of fouling
Feed spacer thickness: 34 mil
Salt rejection: 99.5%
15% recovery rate
pH range of 1–13 tolerance

Specifications

Model/SKU:	DWC63
Manufacturer ID(Part#):	BW30-365 (Part #80773 )
Dimensions(Diameter x Length):	8" x 40" (actual 7.9 x 40)
Stabilized Salt Rejection:	99.5%
Permeate Flow Rate(Gallons per Day, gpd):	9,500 Gal/Day *
Maximum Feed Flow Rate(Gallons per Minute, gpm):	85 gpm (19.3 m3/hr)
Applied Pressure(psi):	225 psi (15.5 bar)
Maximum Operating Pressure(psi):	600 psi (41 bar)
Maximum Pressure Drop(psi):	15 psi (1.0 bar)
Maximum Operating Temperature(°F):	113°F (45°C)
pH Range, Continuous Operation:	2 - 11 **
pH Range, Short-Term Cleaning:	1 - 13
Maximum Feed Silt Density Index(SDI):	SDI 5
Free Chlorine Tolerance(ppm):	< 0.1 ppm ***
Membrane Style:	Drop-in Element
Membrane Material:	Spiral-wound with Polyamide Thin-Film Composite
Active Area:	365 sq. ft. ****
Outer Wrap:	Hard fiberglass outer shell
Housing/Pressure Vessel Size(inch):	8 inch

Permeate flow rate and salt rejection based on the following test conditions: 2,000 ppm NaCl, 225 psi (8.6 bar), 77°F(25°C), pH 8, 15% recovery. Permeate flow rates for individual elements may vary +/-15%.
Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose
Active area guaranteed ±3%. Active area as stated by Dow Water & Process Solutions is not comparable to nominal
Membrane area often stated by some manufacturers.

Industrial Brackish Water Systems

Price

Collections

Filmtec Brackish Water Membrane | BW30-4040 RO Membrane

Filmtec BW30-365 Reverse Osmosis Membrane (9500 GPD)

FILMTEC XLE-440 Extra Low Energy RO Element